Florida Department of Law Enforcement
HomeDry Gas Standards
| Approved Source | Official Distributor | Documentation |
|---|---|---|
| Mid America Airgas (Airgas) | Intoximeters, Inc. 2081 Craig Road St. Louis, MO 63146 Phone: (314) 429-4000 Fax: (314) 429-4170 |
Airgas Source Approval Letter Airgas Correspondence |
| ILMO Products, Inc. | CMI, Inc. 316 East Ninth Street Owensboro, Kentucky 42303 Phone: (866) 835-0690 Fax: (270) 685-6678 |
ILMO Products Source Approval Letter ILMO Products Correspondence |
| Calgaz | CMI, Inc. 316 East Ninth Street Owensboro, Kentucky 42303 Phone: (866) 835-0690 Fax: (270) 685-6678 |
Calgaz Source Approval Letter Calgaz Correspondence |
| Air Liquide/Scott Specialty Gases Inc. | CMI, Inc. 316 East Ninth Street Owensboro, Kentucky 42303 Phone: (866) 835-0690 Fax: (270) 685-6678 |
Scott Specialty Gases Source Approval Letter Scott Specialty Gases Correspondence |
| Intermountain Specialty Gases Inc. | CMI, Inc. 316 East Ninth Street Owensboro, Kentucky 42303 Phone: (866) 835-0690 Fax: (270) 685-6678 |
* Dry gas standards may also be obtained from other vendors who sell approved products.
Miscellaneous Dry Gas Information
Certificate of Analysis
Each dry gas standard cylinder is accompanied by a copy of the Certificate of Analysis for that lot. You need only retain one copy of the Certificate of Analysis for each lot.
Handling and Disposal
Dry gas standard cylinder temperature should not exceed 120°F, which may cause the cylinder to rupture. Dry gas standard cylinders are considered hazardous materials for transport and disposal. Do NOT ship dry gas cylinders with Intoxilyzers.
Free viewers are required for some of the attached documents.
They can be downloaded by clicking on the icons below.
