Dry Gas Standard

Approved Source Official Distributor
Mid America Airgas (Airgas) Intoximeters, Inc.
2081 Craig Road
St. Louis, MO 63146
Phone: (314) 429-4000
Fax: (314) 429-4170

* Airgas dry gas standards my also be obtained from other vendors who sell this product.
Correspondence
(Updated on 9/28/12)
Source Approval Letter
Dry Gas Standard Correspondence
Certificate of Analysis
(Updated on 03/17/16)
Certificates of Analysis used in Department Inspections


 
Approved Source Official Distributor
ILMO Products, Inc. CMI, Inc.
316 East Ninth Street
Owensboro, Kentucky 42303
Phone: (866) 835-0690
Fax: (270) 685-6678

*ILMO dry gas standards may also be obtained from other vendors who sell this product.
Correspondence
(Updated on 11/23/10)
Source Approval Letter
Dry Gas Standard Correspondence
Certificate of Analysis
(Updated on 01/04/2016)
Certificates of Analysis used in Department Inspections


 
Approved Source Official Distributor
Air Liquide/Scott Specialty Gases Inc. CMI, Inc.
316 East Ninth Street
Owensboro, Kentucky 42303
Phone: (866) 835-0690
Fax: (270) 685-6678

*Air Liquide/Scott Specialty Gas dry gas standards may also be obtained from other vendors who sell this product.
Correspondence
(Updated on 10/21/10)
Source Approval Letter
Dry Gas Standard Correspondence
Certificates of Analysis
(Updated on 3/12/10)
Certificates of Analysis used in Department Inspections


 
Approved Source Official Distributor
Calgaz CMI, Inc.
316 East Ninth Street
Owensboro, Kentucky 42303
Phone: (866) 835-0690
Fax: (270) 685-6678

*Calgaz dry gas standards may also be obtained from other vendors who sell this product.
Correspondence
(Updated on 10/21/10)
Source Approval Letter
Dry Gas Standard Correspondence
Certificates of Analysis
(Updated on 11/23/10)
Certificates of Analysis used in Department Inspections


Miscellaneous Dry Gas Information
 
  • Certificate of Analysis: Each dry gas standard cylinder is accompanied by a copy of the Certificate of Analysis
    for that lot. You need only retain one copy of the Certificate of Analysis for each lot.




  •  
  •  
  • Handling and Disposal: Dry gas standard cylinder temperature should not exceed 120°F, which may
    cause the cylinder to rupture. Dry gas standard cylinders are considered hazardous materials for
    transport and disposal.



  •  
  •